Friday, September 2, 2011

Uncompahgre National Forest

The next stop on our epic trip was backpacking in the Uncompahgre National Forest in the San Juan Mountains near Telluride CO.  We drove out Highway 70 though the Eisenhower tunnel at over 11,000 feet and drove past more famous trout streams than you can shake a stick at.  The Eagle, the Roaring fork, the Thunder etc.  No time to fish them all on this trip.  Our plan was to stay out two nights and try to summit a nearby fourteener on the second day. The hike in wasn't long but it gained almost 2 thousand feet in 4 miles.  We set up camp and I got my first chance to fish the lake we were camping at.  The wild flowers were out in full force.  The native columbines were huge and everywhere. 



My dog smells trout


I am by no means an expert lake fisherman but I learned a lot on this trip.  First piece of advise is find the fish.  Not every inch of shoreline on a lake has fish and you can waste a lot of time fishing poor water.  It would be like fishing rapids on a stream.  Maybe fish pass through but not enough to waste your time on.  The obvious places are inlets and outlets.  I happened to find a string of inlets from a creek that held 40 to 50 feeding fish each.  They may have also been tying to spawn in some moving water but it was too deep for me to see exactly what was going on.  The second lake in the chain of three had a number of fish spawning at the outlet (I didn't fish there).  The fish in the lower lake turned out to be some of the most beautiful I have ever seen. They were Colorado river cutthroat in full spawning colors.  Fish of the genus Oncorhynchus (cutthroat, red band, golden trout etc.) spawn after ice out in the spring but at 10,000+ feet "spring" comes in June or this years case, July. 
Male Colorado river cutthroat in full spawning colors




As far as fly patterns go, terrestrials are the way to go. Ants, beetles and grass hoppers out fished any other pattern when there was no hatch.  If there is something specific coming off go that direction if not tie on a beetle and a small dropper. I had tons of fish inspect my parachute Adams and then pass by but the ant got nailed almost every time. 

Female Colorado river cutthroat trout


The water is super clear


This place is absolutely beautiful and is an easy hike in as far as backpacking trips go.  It is typically a day hike for most visitors.  Since the fish are decent sized and the lake gets some pretty good traffic I don't want to name names but the lakes are named appropriately and if you dig enough I gave you enough info to find them. 

Tuesday, August 30, 2011

Skunked on the Blue and the Gunnison

Blue River


Gunnison River
I took a trip of a lifetime this summer after I finished my Ph.D. and the first stop was Colorado for a conference and, of course, some fishing.  In the first week I was lucky  enough to fish both the Blue river and the Gunnison.  Both of which are blue ribbon trout streams known around the world for stellar trout fishing.  There was only one problem.  I got skunked on both rivers.  This years epic snow pack was still on the move down the rivers of Colorado into August.  From what I could gather, that is about a month and a half longer than normal.  Walking back from a rather demoralizing experience on the Blue, with a blanket hatch in the air, I ran into a rafter who asked me if I had any luck.  You could tell by the sheepish sideways smile on his face when he asked that he already knew the answer but was hopeful something had changed.  I said no luck but that the hatch was out of control.  He said "Yeah man, Its all blown out man."  "It'll be epic in September though!"  He's probably right. That didn't help me out any but I hope things have picked up for him by now.   What I did gather from that trip is that the rivers in Colorado are big and they are even bigger in Wyoming and Montana, more on that later. I am used to fishing rivers I can walk across but these beasts are not to be messed with.  Granted the run off was raging but even in low flows these rivers are too big to cross.  They are filled with varying currents and pockets that will send you back to mending school.  And with the currents moving like they were, one really appreciates arial mending or a reach cast.  I am probably the last person anyone should be taking casting advice from but the reach cast is handy and you should use it because it is easy and it helps you catch more fish.  There is probably a good youtube video with someone demonstrating a reach cast but I'll try to briefly explain it here and give you a pointer or two on making it work.  The reach cast is best used when casting at a 45 degree angle up stream and drifting down to a 45.  It you cast normally you line will be pointing at your fly at a 45.  To reach cast, instead of following your line to the water with your rod, reach up stream like you are meaning as the line is falling to the water.  If you did it right your line will be about  perpendicular to the current.  This line angle will create a better drift and significantly reduce the slack line you have on the water.  The problem is this technique shortens your cast. Fortunately, it is easy to compensate because it shortens you cast by the same distance you move the line up stream.  Typically about a 6-8 foot over shot should give you the distance you want. 

Painted Wall in the Black canyon of the Gunnison NP

Gunnison river in the NP

Friday, August 12, 2011

Winston GVX and Allen reels




Great looking rod and reel. I love my new setup!  I added a walnut handle to the Allen reel.  They come with a matching aluminum handle.
I recently finished my Ph.D. and got a few sweet graduation gifts.  The first was a Winston GVX 9' 5 wt rod.  It has been on my "fly rod of the moment" ever since it was released.  Now that I have had about a month to fish and cast with it, I feel like I can give a fair and balanced review.  My first impression was "wow, what a smooth rod to cast." It is billed as a fast action rod but I think it fished very well with more open loops when using two fly, or indicator rigs.  I now know what they mean by the classic Winston action.  My Ascent is a nice rod but seems to be a little rough around the edges compared to the GVX.  It has some serious gun to it also.  I could launch a cone head bugger about 60 feet without a problem.   Now, the conehead sculpzilla I got at a fly shop in Missoula was a different story.  The guy there said he could cast it without a problem with a 5wt.  All I have to say is he must have been one hell of a caster.  I, on the other hand, needed a helmet and maybe some body armor if I were going to cast that thing around with a 5.  I did get it out across the stream a few times, fearing for my life each time that thing whipped by my head.  Both decent casts got strikes when nothing else was working mid-day, but after a few near misses I had to take that beast off.  I'll stick with my 7wt for streamers.  All in all I think the GVX did everything on the stream well. The only thing that I noticed, which is likely user error, was the bottom ferrule would be loose sometimes after casting a couple hours.  Better than a sticky ferrule I guess. 

Update: 8-28-2012

I've fished my winston GVX for over a year now and I love it as much today as I did when I first got it.  What it does best: Dry flys.  This rod is a smooth casting, pinpoint accurate, dry fly casting machine.  It does everything else I have tried well too.  I can chuck a cone head bugger with a double haul into a lake about 50 feet and can toss two nymph rigs with a big heavy point fly or split shot with no problem either.  I have fished a 6 wt with cumbersome nymph rigs and that is better but to have the ability to switch to a dry dropper and toss those with the GVX is worth dealing with a slightly less than ideal wt. rod with nymphs.  What I don't like:  The handle hardware seems a little cheap for a $500 rod.  That's about it.  I love the color, the aluminum rod tube and most of all, the way it casts.
Nice female Colorado River Cutthroat


The next awesome gifts I got were two Allen trout series fly reels.  Why two? Apparently, Allen sent the wrong color on the first order and when my wife called them about it they said to keep the black one and they would send the gun metal color for free.    If that doesn't tell you that Allen has the best customer service around, then I don't know what would.  The reels are machined 6061 bar stock aluminum with a carbon disk drag and are right around $100.  I have looked around at reels for a really long time and there is absolutely no better reel for the price right now than an Allen.  In fact, the Allen trout reel is probably as good or better than any $250 reel on the market.  They also just released the Alpha II which is their big game reel and if it is anything like the equipment they sent me it will not disappoint.  Check out their fly tying hooks fly boxes too.  Sweet deals.  I also bought line from Allen and used it on my trip. They have all the usual sizes in DT and WF plus a few sinking lines all for $20.  Unfortunately, they don't have sinking rates or any specific info on the sinking line.  They were so affordable I thought I would give it a shot.  I used the 5 wt WF the most and so far it seems to float as well as other lines.  It has very low memory and came with a welded loop.  On the down side, it got hot one day and I think the line coating picked up some sand or some kind of grit to make it rough.  I'll try to clean it off and see how that goes but it started to cast with quite a bit of resistance after that incident.  I'll post a longer term review of the line after I have used it a few more times.

Update: 8-28-2012

Yeah, the line sucks.  I took it off mostly because the color was too bright for where I fish but mostly because it really wasn't that good.  For $20 maybe get one to toss in your bag for emergencies but it is not a long term line solution.  The reel, on the other hand, is still awesome for the price.  I did have one problem, I put the reel in the water and got some sand in the drag system.  I tried to take it apart to clean it but striped a screw.  I contacted Allen and heard back right away.  They said that screw is reverse thread...no wonder I stripped it.   They repaired the reel for free and upgraded the drag.  I got the reel back super fast and it has been perfect ever since.  The 3-5 reel which is now their 3-4 reel is a little small for a DT 5wt and the larger reel looks too big for a 5 wt.  I am basically running with no backing but really, will I ever see my backing on my 5 wt?  Probably not.  I do try to keep it out of the sand, but for $100?  Its awesome.  

Male Colorado river cutthroat in full spawning colors with my new Allen reel.  I hope this one wins me the photo of the week contest!

Monday, June 20, 2011

Small stream fishing



   Tom Rosenbauer has some great tips for fishing skinny water in an article on the Orvis page.  I fished a small creek this weekend and could have used that article a few days earlier.  My favorite tip and one I will follow next time is to use a larger tippet diameter than you would on a stream where the fish see more pressure.  My thinking was the opposite: since the fish are spookier on small streams, I thought I would have to use a lighter tippet.  Tom makes the point that the fish are not likely leader shy and the stouter line size can help rip flies from the brush easier. Boy, that would have been handy on Sunday.  I was casting to water that was about two feet wide and I missed more than I would have liked. 

    I decided to take two rods with me, which is something I really don't like to do but I wanted to fish my 6'6" fiberglass rod with dries, and I wanted to be able to fish nymphs in case nothing was happening on the surface.  I should have just stuck with my 8' 3 wt.  The 6'6" rod was too short to keep my fly out of the 5' tall brush around the stream.  I got a few good casts in with it and with the slow action of that rod they lay down so soft.  Nothing hit though.  It was a really strange day for this stream.  Typically, I don't even mess around with nymphs because the fish usually destroy dries, but I didn't get one hit on top in 4 pools.  I ended up hooking a decent size brown on a GB prince nymph.  I have only caught a few browns and nothing of that size out of this stream so it was a nice surprise.

I ended up with a few more on nymphs but overall a pretty poor day on this stream.  The sky was really photogenic though and I got to try out my new Nikon D90.   I played around with the video mode a bit and filmed a pool with about a hundred brook trout in it.  I love this new camera.  I can't wait to get some nice lenses for it.  The only thing I can think of is maybe the midday sun kept the fish from coming to the surface. That usually isn't a problem there though.  Oh well, maybe just an off day.  Hopper season is coming and I now they can't resist those.











Friday, June 17, 2011

Nets


I used to think I was a tough guy.  I didn't need a net.  I can handle a fish.  I was wrong.  I know there are net guys and no net guys.  I used to be the latter, but I have been converted.  Here's why...

I was fishing the lower Kinni when I hooked into a really nice sized brown with my 3wt (>18 inches).  After a pretty good fight, I got him close and tried to get a hand around him.  This beast was too big for me to get a grip on.  I'm 6' and have pretty big hands but, around this fish, my hand couldn't get a grip.  I ended up probably trying to squeeze too hard and eventually lost my grip anyway.  The fish broke off immediately after that and I never got a really good look at him, or a picture for that mater to remember that great fish.  Right then, I was a net man for life.    No more missed grips and a second or third run because I couldn't get a hold of them. 

The second reason I am a net man is the invention of the rubber net bag.  No more flies caught in the netting and the natural slime coat of the fish is more protected.  Also, If you plan to take pictures of your fish, you can rest a fish in a net while you get your camera situated and ready for a shot.  The fish can remain in the water and will be less stressed than if you try to take a picture while holding on to it the whole time. 

Ghosted!

If you are looking for a net, I would recommend a rubber bag and the smallest one you can get away with on your favorite stream.  Big nets are heavy and you won't take them with all the time because they are a pain to deal with.  My mother and father-in-law gave me a Brodin Ghost net for my birthday recently and wow, what an awesome net.  I really think fish are less stressed in the clear bag. They seem to not know it's there and try to swim though it repeatedly.  Plus, what a great looking net!  The teak handle is responsibly harvested from plantation teak in Costa Rica.  The craftsmanship is unmatched and will undoubtedly last a lifetime.  I have the Firehole model which is about right for a stream where the average fish is 10-12 inches.

Leaders

Nice.  Jacked right out of the package. Thanks Rio!

There is a good article at MidCurrent on leaders today.  The question addressed is how long a prepackaged leader should last.  The answer, not surprisingly, is it depends.  Mine have lasted as long as a few trips to about 1 minute after I get it out of the package.  Who goes around looping the butt end of the leader 40,000 times around the rest of the coiled leader?  Can we just stick with like 3-4 loops?  The first time I opened a prepackaged leader I tried to unravel it and about 45 seconds later I was cussing and cutting out knots.  I turned a 9' 5x $5 leader into a 4' butt section in a minute flat.  I can't be the only one who has had these problems.  In fact, the last one I opened I almost ruined for the same reason.  I thought I unraveled it right but I ended up with monster tangle instead. 

Here are my tips for buying leaders:
First, don't think tying your own will save money.  If you like to do it knock yourself out, but I have a hard enough time finding the time to tie flies let alone my own leaders.  If you want to get all crazy with leader science and adjust your butt section length then tying your own is the only option.  Otherwise stick with knotless prefabs.

Second, buy 3 packs. It's basically like buy 2 get one free. 

Third, always buy 9' leaders.  7.5'ers are better for nymphing and you usually use a bigger tippet size for that anyway so just cut off a few feet from you 9' 5x and you have a decent nymphing leader.  For dry flies I like at least a 9' leader in 5x for the clear and still spring creeks in WI and MN.    This way you always have the leader you want.  Like Demetri Martin says "when someone asks me if I have a poncho I don't say no.  I say not yet.  Because I have a blanket and scissors.  I'm only a minute from having a poncho, or 10 scarves."

Fourth, change your leader if it gets too short.  Don't spend hours fishing a leader you have tied 64 inches of 5x tippet on to so you don't have to change it.  It will turn over poorly and you will probably break off a fish if you do hook one due to the dissimilar size of the mono at the knot junction.  I have done this too many times, and I know how tempting it is to just keep fishing no mater how crappy your leader is.  Just change it. You will catch more fish and have a better day.  If you don't have another leader tie on two tippet sizes to step down the size gradually.  Congratulations, you just tied your own knotted leader. 

Maybe it is easier than unwinding one out of the package……

Thursday, May 5, 2011



I read a quote from Sarah Palin today-

"A faceless government is taking away their lifeline, water, all because of a 3-inch fish," Palin said. "Where I come from, a 3-inch fish, we call that bait. There is no need to destroy people's lives over bait."

   Thoughts like this are what lead to species extinction.  Sarah Palin is talking about the delta smelt.  A diminutive fish that seems to have no value except that it exists and is about to be extinct.  The issue is: Where do we draw the line?  Save only game fish? Save all fish?  What about the frogs and birds and the insects?   There is a great article written by David Quammen called "Synecdoche and the Trout" which appeared in the book Wild Thoughts from Wild Places.  Essentially, Quammen argues that the trout represent the environment.  Trout are an indicator species, which we can look to in order to help us understand what state the environment is in.  The bull trout is a perfect example; they can only live in the purest and coldest waters.  We can look to their numbers to judge the success of a stream restoration project.  Similarly, the plight of the delta smelt is an indicator of our overuse of water.  The more we drain the delta, the more smelt will die.
   We care about the smelt not because we want a smelt dinner or have a new delta smelt pattern we are dying to try out.  The line has to be drawn somewhere.  The plight of the delta smelt represents our indifference to the destruction of nature.  How much damage do we need to do before people can see the connection between leaving their sprinklers on in a rain storm and the extinction of a species hundreds of miles away?  The fight for the delta smelt is about water, and LA uses a lot of it.  The agriculture industry in southern California uses a lot too.  Their is so much water pumped out of the Sacramento delta that it flows backward when the huge pumps are turned on.  The fact remains that no one will tell you what to plant in your yard or how often to water your grass. We can only hope the connection between the hose, the delta and the fact that southern California would be nearly a desert without imported water will eventually sink in.
   As for Sarah Palin, she gets paid too much to say the stupid, uninformed and ignorant stuff she says, so I doubt anything will change her mind.